Size Guide
Get the fit right
Decorating looks best when the pieces actually fit the space. This guide shows you how to measure a door, a tree or a wall before you order — so what arrives is what you pictured.
- Door covers
- String lights
- Ornaments
- Wreaths & garlands
Before you start
01two quick rules
You do not need any special tools. A soft tape measure (or a piece of string and a ruler) will do. Two habits make everything easier:
- Measure the actual space, not the furniture or the doorway estimate in your head.
- Leave a little extra room — a slightly larger decoration reads better than one that just barely fits.
Door covers & banners
02the entryway
This is the most common place people size wrong. Measure the full opening you want to cover, then compare it with the dimensions listed on the product page.
Measure the width
Run the tape across the full width of the door or garage opening, from one edge to the other.
Measure the height
Measure from the top of the opening to the floor, or to wherever you plan for the banner to end.
Add a little overhang
If you want the fabric to wrap slightly around the edges, add a few inches to the width.
Check the fixings
Make sure there is a place to hang it — a rod, hooks or a clear area above the frame.
Door covers are made to be a big, simple statement. When in doubt between two sizes, go with the larger one; it is easier to gather extra fabric than to fill in a gap.
String lights & projection
03coverage, not width
For lights, the useful number is total length, not the width of the box. Think about the path the lights will take, not just the straight line.
How to estimate the length you need
| Where it goes | How to measure | Practical tip |
|---|---|---|
| Across a window | Width + a little for droop between points | Allow extra so the strand can hang in gentle loops |
| Around a tree | Height plus the distance around the widest part | Spiral from top to bottom for even coverage |
| Along a wall or mantel | The full run you want lit | Measure in sections if the wall is long |
| Indoor projection light | The wall or ceiling area you want covered | Check the adjustable angle and room darkness instead |
If you are covering more than one surface with the same look, it is often easier to order two shorter strands than to stretch one strand too far.
Ornaments & keepsakes
04the small details
Ornaments are listed by their own width or height. For a tree, the main thing is balance: mix a few larger pieces with more small ones so no single branch is overloaded.
- For a full tree, plan a handful of statement ornaments plus many smaller fillers.
- Check the hanging method — a loop, a hook or a flat base — against the branch you have.
- Keepsake and message ornaments make better gifts when they are given on their own.
Wreaths, garlands & table decor
05finishing touches
A wreath should sit comfortably inside the width of the door or space it hangs on. Garlands are measured by length; tables and mantels by the run you want to dress.
Quick measuring reference
| Item | What to measure | Leave extra for |
|---|---|---|
| Wreath | Width of the door or wall area | A little breathing room on each side |
| Garland | Length of the surface to cover | Slight drape between anchor points |
| Table decor | Width and depth of the table | Space for plates and serving dishes |
| Tree topper | Width of the tree tip area | A stable, flat spot at the top |
Still unsure?
06ask us directly
Sizes are listed on each product page. If you are between two options, send us the measurements of your space and we will tell you what we would choose.
Email: support@christmashubpro.com
Measured and ready?
Go back to the store and pick the pieces that fit your space.
Company details
The company behind this store
Christmas Hub Pro is operated by SILIE. This information is provided so you always know who you are dealing with.
Company
SILIE
Registered address
520 Cleveland Avenue, Largo, FL 33770
Last updated: November 2026 · All policies on this page apply to Christmas Hub Pro.